sales@theESIchoice.com (866) 648-7101 & 870-236-3700

SUBMERSIBLE DEWATERING PUMPS

Easily Drain Ditches with Submersible Dewatering Pumps

A reliable equipment made for professionals, our submersible water pump is the best tool when the job requires high suction lifts. Draining ditches and pits, industrial water drainage or transfer, handling dirty water, water transfers, or excavating drainage can be easily done with a dewatering pump.

These units are best used with pits or drains having a depth of over 8 meters (25-feet) or beyond where suction power weakens. They are suitably used with places where a normal engine-driven pump lags. Dewatering pumps are designed to be submersed in water. They push the water up instead of sucking or drawing it.

Forced liquid is absorbed through the base of the unit which pushes it above the ground. Our submersible dewatering pump offers several standard features with an addition of float switches used to detect water level around the unit allowing the pump to operate automatically. Control boxes are also important basic components for automatic operations.

ESP-1522 [5811-99] Supplied by AMT

Submersible Dewatering Pumps

A large and powerful 1 1/2" discharge submersible pump. Designed with a 1/2 HP motor to move larger volumes of water and for greater depths (maximum head of 47 feet). Standard features include an attached float switch , thermal overload protection and suction screen with 12 foot of power cord.


TECHNICAL DATA

DISCHARGE in. (mm) 1.5 (37)
HP (kW) 1/2 (.37)
VOLTAGE 115AC 1Ø
FULL LOAD AMPS 4.9
STARTING AMPS 24.5
MAX CAPACITY GPM (1) 48 (182)
MAX HEAD ft. (in) 22 (6.8)
OPERATING RPM 3450
THERMAL PROTECTION YES
FLOAT SWITCH YES
UL/CSA YES
DIMENSIONS LxWxH in. (mm) 9.4x12.6 (239x320)
DRY WEIGHT lbs. (kg) 14 (6.3)

ESP-2040 [2XH5] Supplied by AMT

ESP-2040 Submersible Dewatering Pumps

These are ESI's heavy duty stainless-steel cased 2" discharge submersible pumps. 304 stainless-steel is used for the casing, motor housing, shaft, and hardware to provide for corrosion resistance and long life. Cast iron impeller, top, and pump end. Light-weight and slim design will fit easily in dewatering 8" pump pipes. UL/CSA approved with built-in thermal overload protection. Longer power cables are used with 30 foot on the 2040 and 50 foot on the 2052. At the heart of the pump is its best feature, a dual mechanical seal that features a Silicon-carbide/Viton© lower seal and an upper seal of Carbon-Ceramic/Viton©. A dual seal will provide extra protection for the motor in avoiding damaging water leaks.

The ESP-2040 is a 1/2HP unit equipped with a 30 foot long power cable.


TECHNICAL DATA

DISCHARGE in. (mm) 2 (51)
HP (kW) 1/2 (.37)
VOLTAGE 115AC 1Ø
FULL LOAD AMPS 5.4
STARTING AMPS 27
MAX CAPACITY GPM (1) 65 (247)
MAX HEAD ft. (in) 40 (12.5)
OPERATING RPM 3450
THERMAL PROTECTION YES
FLOAT SWITCH OPTIONAL 30' #ES155-930
UL/CSA YES
DIMENSIONS LxWxH in. (mm) 6.7x14.5 (170x368)
DRY WEIGHT lbs. (kg) 29 (13.1)

ESP-2052 [2X11] Supplied by AMT

ESP-2052 Submersible Dewatering Pumps

These are ESI's heavy duty stainless-steel cased 2" discharge submersible pumps. 304 stainless-steel is used for the casing, motor housing, shaft, and hardware to provide for corrosion resistance and long life. Cast iron impeller, top, and pump end. Light-weight and slim design will fit easily in dewatering 8" pump pipes. UL/CSA approved with built-in thermal overload protection. Longer power cables are used with 30 foot on the 2040 and 50 foot on the 2052. At the heart of the pump is its best feature, a dual mechanical seal that features a Silicon-carbide/Viton© lower seal and an upper seal of Carbon-Ceramic/Viton©. A dual seal will provide extra protection for the motor in avoiding damaging water leaks.

The ESP-2052 is a 1 HP unit equipped with a 50 foot long power cable.


TECHNICAL DATA

DISCHARGE in. (mm) 2 (51)
HP (kW) 1 (.75)
VOLTAGE 115AC 1Ø
FULL LOAD AMPS 9.3
STARTING AMPS 46.5
MAX CAPACITY GPM (1) 95 (361)
MAX HEAD ft. (in) 52 (16.2)
OPERATING RPM 3450
THERMAL PROTECTION YES
FLOAT SWITCH OPTIONAL 50' #ES155 - 950
UL/CSA YES
DIMENSIONS LxWxH in. (mm) 7.6x17.1 (193x434)
DRY WEIGHT lbs. (kg) 48 (21.8)

ESP-2032T [5760-95] Supplied by AMT

ESP-2032T Submersible Dewatering Pumps

Extra heavy-duty shredder-trash submersible pumps to use in those really tough applications. These feature a carbide-tipped impeller and a spiral shredder mechanism surface plate is hardened for superior cutting ability. Built for durability with a cast iron housing and a stainless-steel motor housing. UL/CSA approved and thermal overload protection for the motor. A triplex seal system is used that consists of a double mechanical seal and a third shaft seal. Use in applications to prevent clogging and reduce maintenance when cutting through stringy and fibrous material. Applications include septic tanks, sewage treatment plants, sewage pumping stations, dirty water drainage, flood and emergency use. The motors are rated for continuous duty use. If you want a long-life trash submersible pump for continuous duty then ESI has the unit for you.

The ESP-2032T is a 1HP, 2" discharge unit equipped with a 18 foot long power cable.

Larger sizes and voltage options are available on request


TECHNICAL DATA

DISCHARGE in. (mm) 2 (51)
HP (kW) 1 (.75)
VOLTAGE 115AC 1Ø
FULL LOAD AMPS 13.5
STARTING AMPS 67.5
MAX CAPACITY GPM (1) 120 (456)
MAX HEAD ft. (in) 32 (10)
OPERATING RPM 3450
THERMAL PROTECTION YES
FLOAT SWITCH OPTIONAL 30' #ES155 - 030
UL/CSA YES
DIMENSIONS LxWxH in. (mm) 11.5x18.5 (292x467)
DRY WEIGHT lbs. (kg) 48 (21.8)

ESP-3042T [5763-95] Supplied by AMT

ESP-3042T Submersible Dewatering Pumps

Extra heavy-duty shredder-trash submersible pumps to use in those really tough applications. These feature a carbide-tipped impeller and a spiral shredder mechanism surface plate is hardened for superior cutting ability. Built for durability with a cast iron housing and a stainless-steel motor housing. UL/CSA approved and thermal overload protection for the motor. A triplex seal system is used that consists of a double mechanical seal and a third shaft seal. Use in applications to prevent clogging and reduce maintenance when cutting through stringy and fibrous material. Applications include septic tanks, sewage treatment plants, sewage pumping stations, dirty water drainage, flood and emergency use. The motors are rated for continuous duty use. If you want a long-life trash submersible pump for continuous duty then ESI has the unit for you.

The ESP-3042T is a 2 HP, 3" discharge unit equipped with a 32 foot long power cable (no plug).

Larger sizes and voltage options are available on request.


TECHNICAL DATA

DISCHARGE in. (mm) 3 (76)
HP (kW) 2 (1.5)
VOLTAGE 230AC 1Ø
FULL LOAD AMPS 12
STARTING AMPS 60
MAX CAPACITY GPM (1) 190 (722)
MAX HEAD ft. (in) 42 (13)
OPERATING RPM 3450
THERMAL PROTECTION YES
FLOAT SWITCH OPTIONAL WITH CONTROL BOX
UL/CSA YES
DIMENSIONS LxWxH in. (mm) 14x21.7 (356x551)
DRY WEIGHT lbs. (kg) 80 (36.3)

If You Have Any Queries for Equipment Synergy International

Scroll to Top